The FH800SX-i is a powerful, high-speed horizontal machining center featuring a 6,000 RPM spindle, with options of an 8,000 RPM or 15,000 RPM high-torque spindle, and a rapid feedrate of 2,127 ipm (54 m/min). This machine has dual ballscrew drive on the Y and Z axes, and a Meehanite cast iron base for improved rigidity. The expansive work envelope allows for large-part machining.
Pallet Size 31.5” x 31.5” (800 mm x 800 mm) Table Index Full NC table (360,000 positions) X-axis Travel (column) 57.1” (1,450 mm) Y-axis Travel (spindle head) 49.2” (1,250 mm) Z-axis Travel (work table) 61” (1,550 mm) Maximum Work Load on the Pallet 5,510 lb (2,500 kg) Spindle Drive Motor 40 HP (30 kW) for 30 min. / 30 HP (22 kW) cont. Spindle Output Torque 442 ft-lb (600 Nm) Spindle Taper CAT50 Spindle Speed 6,000 RPM Spindle Type Direct drive Rapid Feedrate (X, Y, and Z axes) 2,127 ipm (54 m/min) Tool Storage Capacity 60 Standard (121 Optional) Standard Floor Space 382” x 185" x 145” (9,680 mm x 4,680 mm x 3,680 mm) Standard Net Weight 61,600 lb (28,000 kg)
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Linear Position Accuracy ± .00012” (.003 mm) full stroke Linear Repeatability ± .00006” (.0015 mm) Rotary Table Index Accuracy ± 7 arc seconds Rotary Table Index Repeatability ± 3.5 arc seconds Hydraulic Oil Mobil DTE Oil Light (4.75 gal) Slideway Lubrication Mobil Vactra #2 (.76 gal) Spindle Bearing Lubrication Mobil Velocite #6 (.76 gal) Spindle Cooling Mobil Velocite #3 (5.28 gal) Table Lubrication Mobil Gear 600 XP 150 (1 gal) Air Source 56 ~ 70 psi (4 ~ 5 kgf / cm²) Power Capacity (Machine Wired: 208V - Transformer Not Included) 59 kVA
FH800SX-i powerful, high-speed horizontal machining center
Increase Uptime and Keep Production Moving
Increase uptime with Toyoda’s patented replaceable spindle taper. Instead of replacing the entire spindle, switch out the taper and resume production.
Speed and Stability, United
The SX Series comes standard with a 40 HP, 6,000 RPM spindle, and offers an optional 40 HP, 15,000 RMP spindle or 50 HP, high-torque 8,000 RPM spindle for the most rigid of cuts without sacrificing production time.
Toyoda's proprietary thermal displacement sensors adjust for ballscrew heat expansion during machining. This technology maintains your tight tolerances for each and every cut.
Dual Y- and Z-Axis Ballscrews
These dual ballscrews increase machining stability during heavy-duty cutting.×