• The FH550SX is a powerful, high-speed horizontal machining center featuring an 8,000 RPM high-torque spindle, with an option of 15,000 RPM spindle, and a rapid feedrate of 2,362 ipm (60 m/min). This machine has dual ballscrew drive on the Y and Z axes, and a Meehanite cast iron base for improved rigidity.


    Pallet Size 21.65" x 21.65" (550 mm x 550 mm)
    Table Index Full NC table (360,000 positions)
    X-axis Travel (column) 29.52” (750 mm)
    Y-axis Travel (spindle head) 31.50” (800 mm)
    Z-axis Travel (work table) 33.46” (850 mm)
    Maximum Work Load on the Pallet 1,760 lb (800 kg)
    Spindle Drive Motor  50 HP (37 kW) for 30 min. / 40 HP (30 kW) cont.
    Spindle Output Torque 744 ft-lb (1,009 Nm)
    Spindle Taper CAT50
    Spindle Speed 8,000 RPM 
    Spindle Type Direct drive
    Rapid Feedrate (X, Y, and Z axes) 2,362 ipm (60 m/min)
    Tool Storage Capacity 60 Standard (121 Optional)
    Standard Floor Space 284" x 131" x 126" (7,207 mm x 3,312 mm x 3,180 mm)
    Standard Net Weight 41,000 lb (18,600 kg)





    Linear Position Accuracy ± .00012" (.003 mm) full stroke
    Linear Repeatability ± .00008" (.002 mm)
    Rotary Table Index Accuracy ± 7 arc seconds
    Rotary Table Index Repeatability  ± 3.5 arc seconds



    Hydraulic Oil Mobil DTE Oil Light (14 gal)
    Slideway Lubrication Mobil Vactra #2 (.76 gal)
    Spindle Bearing Lubrication Mobil Velocite #6 (.76 gal)
    Spindle Cooling Mobil Velocite #3 (9.3 gal)
    Table Lubrication               Mobil Gear 600 XP 150 (.79 gal)
    Air Source 56 ~ 70 psi (4 ~ 5 kgf / cm²)
    Power Capacity (Machine Wired: 208V - Transformer Not Included) 54 kVA


Increase Uptime and Keep Production Moving

Increase uptime with Toyoda’s patented replaceable spindle taper. Instead of replacing the entire spindle, switch out the taper and resume production.

Motion Detected

Toyoda's proprietary thermal displacement sensors adjust for ballscrew heat expansion during machining. This technology maintains your tight tolerances for each and every cut.

Share This:
  • Twitter
  • Facebook
  • LinkedIn
  • E-mail
  • StumbleUpon

Difficulty seeing the panoramic? Try viewing it in its own window here.

Solidly Constructed

Utilizing JTEKT’s proprietary FCD 600 cast iron technology for the base and column, the solid, high-grade Meehanite cast iron base has three-point support.

Prev | Next


Cutting Rigidity

These dual ballscrews increase machining stability during heavy-duty cutting.

Prev | Next


Spindle Taper:

ATC (Tool Capacity):

Spindle Speed:


I'm also interested in:


♦♦♦ Are required fields