The FH450S is a high-speed horizontal machining center featuring a 15,000 RPM spindle, tool-to-tool cycle time of 1.3 seconds, and a rapid feedrate of 1,968 ipm (50 m/min).
Pallet Size 17.7" x 17.7" (450 mm x 450 mm) Table Index Full NC table (360,000 positions) X-axis Travel (column) 23.62” (600 mm) Y-axis Travel (spindle head) 23.62” (600 mm) Z-axis Travel (work table) 23.62” (600 mm) Maximum Work Load on the Pallet 880 lb (400 kg) Spindle Drive Motor 30 HP (22 kW) for 15 min. / 25 HP (18.5 kW) cont. Spindle Output Torque 123 ft-lb (167 Nm) Spindle Taper CAT40 Spindle Speed 15,000 RPM Spindle Type Direct drive Rapid Feedrate (X, Y, and Z axes) 1,968 ipm (50 m/min) Tool Storage Capacity 60 Standard (120 Optional) Standard Floor Space 243" x 100" x 125" (6,159 mm x 2,520 mm x 3,160 mm) Standard Net Weight 25,300 lb (11,500 kg)
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Linear Position Accuracy ±.00012" (.003 mm) full stroke Linear Repeatability ± .00006" (.0015 mm) Rotary Table Index Accuracy ± 7 arc seconds Rotary Table Index Repeatability ± 3.5 arc seconds Hydraulic Oil Mobil DTE Oil Light (14 gal) Slideway Lubrication Mobil Vactra #2 (.76 gal) Spindle Bearing Lubrication Mobil Velocite #6 (.76 gal) Spindle Cooling Mobil Velocite #3 (4.2 gal) Table Lubrication Mobil Gear 600 XP 150 (1.1 gal) Air Source 56 ~ 70 psi (4 ~ 5 kgf / cm²) Power Capacity (Machine Wired: 208V - Transformer Not Included) 52 kVA
Toyoda's proprietary thermal displacement sensors adjust for ballscrew heat expansion during machining. This technology maintains your tight tolerances for each and every cut.
Increase Uptime and Keep Production Moving
Increase uptime with Toyoda’s patented replaceable spindle taper. Instead of replacing the entire spindle, switch out the taper and resume production.
Warming Up is for the Competition
Toyoda’s patented bearing preload allows machines to begin cutting when they are turned on – no warm-up time required. This same technology allows our machines to run 24/7, without worrying about overheating during production.
Dual Z-Axis Ballscrews
Dual ballscrews increase machining stability during heavy-duty cutting.×
This 30 HP, 15,000 RPM high-speed spindle makes the most of your production.×
Cylindrical roller guideways offer more rigidity and are able to take heavier cuts than their ball guideway counterparts.×