Share This:
  • Twitter
  • Facebook
  • LinkedIn
  • E-mail
  • StumbleUpon

FH400J

Overview
Specifications
Accuracy
Requirements
  • The FH400J is a compact, high-speed horizontal machining center featuring a 15,000 RPM spindle, tool-to-tool cycle time of .9 seconds, and a rapid feedrate of 2,362 ipm (60 m/min).

  •  

    Pallet Size 15.75" x 15.75" (400 mm x 400 mm)
    Table Index Full NC table (360,000 positions)
    X-axis Travel (column) 23.62” (600 mm)
    Y-axis Travel (spindle head) 22.05” (560 mm)
    Z-axis Travel (work table) 24.80” (630 mm)
    Maximum Work Load on the Pallet 880 lb (400 kg)
    Spindle Drive Motor  30 HP (22 kW) for 15 min. / 25 HP (18.5 kW) cont.
    Spindle Output Torque 123 ft-lb (167 Nm)
    Spindle Taper CAT40
    Spindle Speed 15,000 RPM
    Spindle Type Direct drive
    Rapid Feedrate (X, Y, and Z axes) 2,362 ipm (60 m/min)
    Tool Storage Capacity 40 Standard (60, 119 Optional)
    Standard Floor Space  163" x 99" x 108" (4,122 mm x 2,500 mm x 2,733 mm)
    Standard Net Weight 24,200 lb (11,000 kg)

     

    SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

     

  •  

    Linear Position Accuracy ± .00012" (.003 mm) full stroke
    Linear Repeatability ± .00006" (.0015 mm)
    Rotary Table Index Accuracy ± 7 arc seconds
    Rotary Table Index Repeatability  ± 3.5 arc seconds

     

  •  

    Hydraulic Oil Mobil DTE Oil Light (4.75 gal)
    Slideway Lubrication Mobil Vactra #2 (.76 gal)
    Spindle Bearing Lubrication Mobil Velocite #6 (.76 gal)
    Spindle Cooling Mobil Velocite #3 (4 gal)
    Table Lubrication               Mobil Gear 600 XP 150 (.4 gal)
    Air Source 56 ~ 70 psi (4 ~ 5 kgf / cm²)
    Power Capacity (Machine Wired: 208V - Transformer Not Included) 52 kVA

     


Video

Toyoda J Series High-Speed Machining Center

Increase Uptime and Keep Production Moving

Increase uptime with Toyoda’s patented replaceable spindle taper. Instead of replacing the entire spindle, switch out the taper and resume production.

Warming Up is for the Competition

Toyoda’s patented bearing preload allows machines to begin cutting when they are turned on – no warm-up time required. This same technology allows our machines to run 24/7, without worrying about overheating during production.

Motion Detected

Toyoda's proprietary thermal displacement sensors adjust for ballscrew heat expansion during machining. This technology maintains your tight tolerances for each and every cut.

Share This:
  • Twitter
  • Facebook
  • LinkedIn
  • E-mail
  • StumbleUpon


×
Difficulty seeing the panoramic? Try viewing it in its own window here.

Solidly Constructed

Utilizing JTEKT’s proprietary FCD 600 cast iron technology for the base and column, the solid, high-grade Meehanite cast iron base has three-point support.

Prev | Next

×

High-Speed Spindle

This 30 HP, 15,000 RPM high-speed spindle makes the most of your production.

Prev | Next

×

Roller Guideways

Cylindrical roller guideways offer more rigidity and are able to take heavier cuts than their ball guideway counterparts.

Prev | Next

×

Spindle Taper:

ATC (Tool Capacity):

Spindle Speed:

Table:

I'm also interested in:

 

♦♦♦ Are required fields

×

INDUSTRY NEWS