Share This:
  • Twitter
  • Facebook
  • LinkedIn
  • E-mail
  • StumbleUpon

FH1250SX 5-axis

Overview
Specifications
Accuracy
Requirements
  • The FH1250SX 5-axis is a five-axis horizontal machining center designed for complex, large part machining. It features a 10,000 RPM integral tilting spindle and rapid feedrates of 1,260 ipm (32 m/min) on the X and Y axes and 1,654 ipm (42 m/min) on the Z axis.

  •  

    Pallet Size 49.2" x 49.2" (1,250 mm x 1,250 mm)
    Table Index Full NC table (360,000 positions)
    X-axis Travel (column) 86.6" (2,200 mm)
    Y-axis Travel (spindle head) 63” (1,600 mm)
    Z-axis Travel (work table) 72.8" (1,850 mm)
    Maximum Work Load on the Pallet 11,000 lb (5,000 kg)
    Spindle Drive Motor  40 HP (30 kW) for 30 min. / 33 HP (25 kW) cont.
    Spindle Output Torque 195 ft-lb (263 Nm)
    Spindle Taper CAT50
    Spindle Speed 10,000 RPM
    Spindle Type Direct drive
    Rapid Feedrate (X and Y axes) 1,260 ipm (32 m/min)
    Rapid Feedrate (Z axis) 1,654 ipm (42 m/min)
    Rapid Feedrate (A axis) 30 RPM
    Rapid Feedrate (B axis) 5.6 RPM
    Tool Storage Capacity 60 Standard (121 Optional)
    Standard Floor Space 382" x 258" x 178" (9,688 mm x 6,533 mm x 4,520 mm)
    Standard Net Weight 109,100 lb (49,500 kg)

     

    SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

     

  •  

    Linear Position Accuracy (X, Y, and Z axes) ± .00012" (±0.003 mm) full stroke
    Linear Repeatability (X, Y, and Z axes) ± 0.00008" (± 0.002 mm)
    Rotary Table Index Accuracy ± 7 arc seconds
    Rotary Table Index Repeatability  ± 3.5 arc seconds
    A-axis Accuracy ± 5 arc seconds
    A-axis Repeatability ± 3 arc seconds

     

  •  

    Hydraulic Oil Mobil DTE Oil Light (16.6 gal)
    Slideway Lubrication Mobil Vactra #2 (1.5 gal)
    Spindle Bearing Lubrication Mobil Velocite #6 (.76 gal)
    Spindle Cooling Mobil Velocite #3 (5.3 gal)
    Table Lubrication               Mobil Gear 600 XP 150 (1.1 gal)
    Air Source 56 ~ 70 psi (4 ~ 5 kgf / cm²)
    Power Capacity (Machine Wired: 208V - Transformer Not Included) 59 kVA

     


Video

FH1250SX 5-axis video
Share This:
  • Twitter
  • Facebook
  • LinkedIn
  • E-mail
  • StumbleUpon


×
Difficulty seeing the panoramic? Try viewing it in its own window here.

Tilt Spindle

The 10,000 RPM integral spindle provides for +100 degrees to -45 degrees to of machining.

Prev | Next

×

Built for Innovation

The FH125SX 5-axis was designed with the aerospace industry in mind. For large components such as bulkheads, wingspans, door frames, and tail flaps, this machine is a top performer in fast machining.

Prev | Next

×

Triple Trough Design

Three screw augers make chip removal efficient.

Prev | Next

×

Spindle Taper:

ATC (Tool Capacity):

Spindle Speed:

Table:

I'm also interested in:

 

♦♦♦ Are required fields

×

INDUSTRY NEWS