TH555 F4X

Overview
Specifications
Accuracy
Requirements
  • The TH555 F4X is a space-saving horizontal machining center for dedicated parts production. This TOP center is designed with right- and left-hand specifications to make loading and unloading of the workpiece more efficient for manual and automated cells. It features cylindrical roller guides, a solid cast iron base, and rapid speeds.

  •  

    Rotary Table Size* Ø 19.68" (Ø 500 mm)
    NC Table* 360,000 Positions
    X-axis Travel (column) 19.68" (500 mm)
    Y-axis Travel (spindle head) 21.65" (550 mm)
    Z-axis Travel (spindle) 20.87" (530 mm)
    Maximum Work Load on the Pallet 1,764 lb (800 kg)
    Spindle Drive Motor  40 HP (30 kW) for 15 min. / 34 (26 kW) cont.
    Spindle Taper HSK A63
    Spindle Speed 8,000 RPM
    Rapid Feedrate (X, Y, and Z axes) 2,362 ipm (60 m/min)
    Tool Storage Capacity 16 Standard
    Standard Floor Space 51.18" x 161.81" (1,300 mm x 4,110 mm)
    Standard Net Weight 14,330 lb (6,500 kg)
    * Machine can be packaged with B-axis indexer, A-axis trunnion, B-over-A indexer (5-axis).

     

    SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

     

  •  

    Linear Position Accuracy ± .00012" (.003 mm) full stroke
    Linear Repeatability ± .00008" (.002 mm)
    Rotary Table Index Accuracy ± 15 arc seconds

     

  •  

    Hydraulic Oil Mobil DTE Oil Light (3.17 gal)
    Slideway Lubrication Mobil Vactra #2S (.71 gal)
    Table Lubrication               Mobil Gear 629
    Spindle Head Lubrication Mobil DTE Oil Light (.26 gal)
    Air Source 43 ~ 70 psi (.3 ~ .5 MPa)
    Power Capacity (Machine Wired: 200V - Transformer Not Included) 51 kVA

     

Motion Detected

Toyoda's proprietary thermal displacement sensors adjust for ballscrew heat expansion during machining. This technology maintains your tight tolerances for each and every cut.

Share This:
  • Twitter
  • Facebook
  • LinkedIn
  • E-mail
  • StumbleUpon


×
Difficulty seeing the panoramic? Try viewing it in its own window here.

Dedicated Production

TOP centers have only one dedicated work fixture, which enables hydraulic and pneumatic actuation circuits through the table.

Prev | Next

×
×
×

 

♦♦♦ Are required fields

×

INDUSTRY NEWS